Cocoon on base

https://youtu.be/ZwHv6XhFNWI

Assemble your cocoon on a base easily

1

Moisten the base of the cocoon with a spray. Let the cocoon soften for about 5 minutes.

2

Insert the disc in the cocoon and engage the screw in one of the 3 drilled holes (to be chosen according to the desired degree of inclination) so that it comes out of the cocoon.

3

Place the nut in the hexagonal hole in the center of the base. (underneath, on the feet side)

4

Place the cocoon and the disc on the base. Using the disc, press the cocoon against the base so as to engage the screw in the nut. Finalize the tightening with the key.